PC2-LIMBO
CompactPCI® PlusIO CPU Card • Intel® Atom™ E6xx Series Processor
The PC2-LIMBO is a low power 4HP/3U CompactPCI® CPU board, equipped with an Intel® Atom™ E6xx series 1.6GHz processor, available on request for the industrial operating temperature range. The PC2-LIMBO front panel is provided with two Gigabit Ethernet jacks, two USB receptacles, and a DVI connector for attachment of a high resolution digital display.
The PC2-LIMBO is equipped with up to 2GB soldered RAM for rugged applications. An on-board CFast™ host connector is provided for attachment of a 3Gbps SATA SSD module. In addition, a microSD card holder can accommodate a low cost industrial microSDHC Flash card. Further more, several SATA based low mass storage expansion modules are available as an option. The PC2-LIMBO is equipped wit a set of local expansion interface connectors, which can be optionally used to attach a mezzanine side board. A variety of expansion cards is available, e.g. providing legacy I/O and additional PCI Express based I/O circuitry such as SATA and Gigabit Ethernet, or a secondary video output. Most mezzanine side cards can accommodate in addition a 2.5-inch drive.
Typically, the PC2-LIMBO and the related side card would come as a readily assembled 8HP unit. As an alternate, Flash based mezzanine storage modules are available that fit on the PC2-LIMBO while maintaining the 4HP profile. The C47-MSATA module e.g. accommodates two mSATA SSDs and can be operated in RAID mode. The C42-SATA module is provided with a 1.8-Inch Micro SATA SSD up to 800GB.
Downloads & Ressources
Documents
Application Notes
General Information
Firmware
Expansion Modules
Specifications
- CompactPCI® System Slot Controller
- CompactPCI® PlusIO Rear I/O According to PICMG® 2.30
- Hybrid Systems Option (Dual Backplane CompactPCI® and CompactPCI® Serial)
- Based on the Intel® Queens Bay Platform (Tunnel Creek CPU, Topcliff PCH)
- Intel® Atom™ Series E6xx Mobile Processor, Power Optimized CPU, Integrated Graphics Engine
- E620(T) Processor 0.6GHz 3.3W TDP (T = -40°C to +85°C)
- E640(T) Processor 1.0GHz 3.6W TDP (T = -40°C to +85°C)
- E660(T) Processor 1.3GHz 3.6W TDP (T = -40°C to +85°C)
- E680(T) Processor 1.6GHz 4.5W TDP (T = -40°C to +85°C)
- DDR2 Soldered Memory up to 2GB
- Integrated Graphics Controller (Front Panel: DVI or VGA Connector Option)
- Max Resolution 1920×1080
- Intel® EG20T (Topcliff) Platform Controller Hub (PCH)
- Dual Gigabit Ethernet Controllers (Individually BIOS Controlled either F/P or J2 RIO)
- Two Native SATA Channels 3Gbps
- Four Additional SATA Channels 3Gbps, Mezzanine Usage (Option on Request) and/or Rear I/O (JMicron Controllers, no BIOS Boot Support as of Current)
- Twelve USB 2.0 Channels
- CFast™ Card Host Connector on-Board (SATA 3Gbps I/F)
- microSD Host Connector (up to 32GB Class 6 Speed microSDHC Card Support)
- SATA 1.8-Inch Solid State Drive (SSD) up to 800GB with C42-SATA Mezzanine Module Option (4HP Assembly Height Maintained)
- CompactFlash and/or USB SSD with C40-SCFA Mezzanine Module Option (4HP Maintained)
- Secondary CFast™ Card Host Connector with C41-CFAST Mezzanine Module Option (4HP Maintained)
- On-Board PCI Express® Packet Switch (4 Lanes available for Rear I/O and CPCI Serial Backplane Respectively, another 1 Lane for Mezzanine Side Card)
- Legacy I/O Expansion Connectors (CAN2.0B, HD Audio, LPC, PS/2, UART)
- High Speed I/O Expansion Connectors (LVDS, PCI Express®, SATA, USB)
- Variety of Mezzanine Expansion Boards (Side Cards) Available with and w/o PCIe
- Most Mezzanines Optionally Equipped with 2.5-Inch Single- or Dual-Drive
- Rear I/O Transition Module Option (e.g. PR1-RIO)
- +5V Only Design, on-Board 3.3V Regulator Can Supply CPCI Peripheral Slot Cards
- UEFI Phoenix BIOS with ACPI
- Long Term Availability
- Coating, Sealing, Underfilling on Request
- RoHS compliant
Simplified Block Diagram